Equalizer DBX 2231 Dual 31 Band Profesional Graphic Equalizer

Equalizer DBX 2231 Dual 31 Band Profesional Graphic Equalizer Features :

Input

  • Connectors: 1/4 inch TRS, female XLR (pin 2 hot), and barrier terminal strip
  • Type: Electronically balanced/unbalanced, RF filtered
  • Impedance: Balanced 40k ohm, unbalanced 20k ohm
  • Max Input Level: >+21dBu balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1kHz

Outputs

  • Connectors: 1/4 inch TRS, male XLR (pin 2 hot), and barrier terminal strip
  • Type: Impedance-balanaced/unbalanced, RF filtered
  • Impedance: Balanced 200 Ohms, unbalanced 100 Ohms
  • Max Output Level: >+21dBu balanced/unbalanced into 2k or greater >+20dBm balanced/unbalanced (into 600 Ohms)

System Performance

  • Bandwidth: 20Hz to 20kHz, +/-0.5dB
  • Frequency Response: <10Hz to >50kHz, +0.5/-3dB
  • Noise Reduction In (+/-6 and +/-12dB range):
    • Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
    • Dynamic Range: >120dB, unweighted
  • Noise Reduction Out: (+/-6dB range):
    • Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
    • Dynamic Range: >112dB, unweighted
  • Noise Reduction Out (+/-12dB range):
    • Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
    • Dynamic Range: >108dB, unweighted
  • THD + Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
  • Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
  • Noise Reduction: Up to 20dB of dynamic broadband noise reduction

Function Switches

  • Type III NR: Activates dbx Type III Noise Reduction
  • EQ Bypass: Bypasses the Graphic Equalizer section in the signal path
  • Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
  • Range (Recessed): Selects either +/- 6dB or +/-15dB slider boost/cut range

Indicators

  • Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
  • Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
  • Type III NR Active: Yellow LED
  • EQ Bypass: Red LED
  • Clip: Red LED
  • Low Cut Active: Red LED
  • +/-6dB range: Yellow LED
  • +/-12dB range: Red LED

Power Supply

  • Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz 230VAC 50/60Hz
  • Power Consumption: 23 watts
  • Mains Connection: IEC receptacle

Equalizer DBX 2231 Dual 31 Band Profesional Graphic Equalizer

 

Equalizer DBX 2231 Dual 31 Band Profesional Graphic Equalizer

 

Equalizer BSS Audio Opal FCS-966 Constant Q 2-Channel Graphic Equalizer

Equalizer BSS Audio Opal FCS-966 Constant Q 2-Channel Graphic Equalizer Features :

Input Section :
•    Input Impedance: 10kOhm, electronically balanced
•    Maximum Imput Level : >+20dBu
•    CMRR: >-40dB @1kHz

Output section :
•    Output Impedance: < 50 Ohms, electronically balanced
•    Maximum Output Level: >+20dBu into 600 Ohms

Filters :
•    HP filter control: OUT to 250Hz @ 12dB/octave
•    LF contour: +/-6dB shelving @ 50Hz 6dB/octave
•    HF contour: +/-6dB shelving @ 14kHz 6db/octave
•    FREQUENCY bands: +/-15dB on ISO centres with a Q of 4

General Performance :
•    HP filter set to OUT. GAIN, HF, LF & all faders set to 0
•    Frequency Response: 5Hz to 45kHz +/-1dB
•    Noise: <-94dBu 22Hz to 22kHz
•    Dynamic Range: > 115dB
•    Cross Talk: >-80dB @1kHz
•    Distortion: <0.005%THD (80kHz measurement
•    BW) 20Hz-20kHz.
•    GAIN control: +10dB to -infinity
•    Dimensions: 19″ x 5.25″ x 7.1″ (483mm x 134mm x 180mm)
•    Weight: 6.6lbs (3kgs), unpacked
•    AC Power: 115/230V AC, 50/60Hz, 30VA.

Package included :
•    1x FCS-966 Graphic Equalizer
•    1x power cord
•    1x user manual

Equalizer BSS Audio Opal FCS-966 Constant Q 2-Channel Graphic Equalizer

 

 

 

Top Search Today:

  • harga equaliser bss ori

Equalizer DBX 231 Dual 31 Band Profesional Graphic Equalizer

Equalizer DBX 231 Dual 31 Band Profesional Graphic Equalizer Features :

  • Two 31-band, 1/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of ±6 or ±12 dB
  • 12dB per octave 50Hz low-cut filter
  • Front panel bypass switch
  • ±12 dB input gain range
  • 4-segment LED ladders for monitoring output levels
  • XLR and TRS Inpts and Outputs
  • Internal Toroidal Transformer
  • Frequency Repsonse of <10Hz to >50kHz
  • Dynamic range of greater than 108dB

Equalizer DBX 231 Dual 31 Band Profesional Graphic Equalizer

 

Equalizer DBX 1231 Profesional Graphic Equalizer

Equalizer DBX 1231 Profesional Graphic Equalizer

Great performance at a great value! With finger-snap-simple operation and superior performance, the dbx 12 Series are mainstays in countless rigs, meeting the needs of the most demanding sound reinforcement environments while offering straightforward control. Precision engineered to provide years of maintenance-free operation in any application, the 12 series has proven itself on the road and in studios time after time. The 1231 offers 31, 1/3 octave bands with 45mm faders.

Tech Specs

Number of Bands 2 x 31-band
Q Type Fixed
Boost/Cut Range ±6, ±15 (Switchable)
Low Cut Filter 40Hz, 18 dB/octave
Faders Throw Medium-throw
Rack Spaces 3U
Height 5.25″
Depth 7.9″
Width 19″
Weight 10.6 lbs.

Equalizer DBX 1231 Profesional Graphic Equalizer

Equalizer DBX 1231 Profesional Graphic Equalizer

 

Equalizer DBX 1231 Profesional Graphic Equalizer

Equalizer DBX 1231 Profesional Graphic Equalizer

 

Equalizer DBX 1231 Profesional Graphic Equalizer

Equalizer DBX 1231 Profesional Graphic Equalizer

 

Equalizer DBX 1231 Profesional Graphic Equalizer

Equalizer DBX 1231 Profesional Graphic Equalizer

 

Equalizer DBX 1231 Profesional Graphic Equalizer

Equalizer DBX 1231 Profesional Graphic Equalizer

 

Digital Reverb Alesis MicroVerb 4 Signal Processor

Digital Reverb Alesis MicroVerb 4 Signal Processor

When It Comes To Alesis Reverb, Don’t Delay!

At Sweetwater, we believe that any piece of music technology equipment that takes you away from making music just isn’t doing its job. That’s why Alesis’ MicroVerb 4 is an ideal piece of gear – a great-sounding reverb with no complications! The MicroVerb 4 offers 100 Preset and 100 User Programs (200 total), carefully created for great sonic quality and usefulness.the Alesis Microverb 4 gives you the effects you need without bogging you down in programming hassles. You’ll find everything from high-quality Reverb, Delay and Chorus to Multi- and Dual-Send programs for simultaneous multi-effects and more. And with the 18-bit digital converters, the Alesis Microverb 4offers the superb audio quality that you expect from an Alesis processor. If you’ve been looking for a reverb to doctor your mixes without giving you a headache, the MicroVerb 4 is good medicine!

Alesis Microverb 4 Features:

  • Input and Output control.
  • Mix control.
  • Left and right input level meters.
  • 18 bit conversion.
  • Footswitch control of bypass, Lezlie speed (fast or slow) and tap tempo.
  • 100 presets and 100 user locations.
  • MIDI control of program changes, Sysex dumps and effectparameters.
  • Reverb, delay, chorus, flange, pitch shifting, Lezlie, Autopan and Special FX parameters.
  • The bank button allows you to toggle between preset and user banks.

Tech Specs

Processor Type Multi-FX
Number of Channels 2
Presets – Factory 100 Factory
Presets – User 100 User
Analog Inputs 2 x 1/4″ TS
Analog Outputs 2 x 1/4″ TS
MIDI I/O In/Out/Thru
Rack Spaces 1U
Height 1.75″
Width 19″
Manufacturer Part Number MicroVerb4

Digital Reverb Alesis MicroVerb 4 Signal Processor

Digital Reverb Alesis MicroVerb 4 Signal Processor

 

Digital Reverb Alesis MicroVerb 4 Signal Processor

Digital Reverb Alesis MicroVerb 4 Signal Processor

 

Digital Reverb Alesis MicroVerb 4 Signal Processor

Digital Reverb Alesis MicroVerb 4 Signal Processor

 

Digital Reverb Alesis MicroVerb 4 Signal Processor

Digital Reverb Alesis MicroVerb 4 Signal Processor

 

Digital Reverb Alesis MicroVerb 4 Signal Processor

Digital Reverb Alesis MicroVerb 4 Signal Processor

 

Crossover Proel ACRX2 2 Way

Crossover Proel ACRX2 2 Way Sound processor 2-way active crossover solution with a discrete subwoofer output. Original by proel.com

Crossover Proel ACRX2 2 Way

 

Technical specifications Crossover Proel ACRX2 2 Way :

  • Input connectors : 2 balanced XLRs – 2 unbalanced 6,3 mm (1/4”) TS jacks
  • Output connectors : 5 unbalanced 6,3 mm (1/4”) TS jacks
  • Frequency response : 20Hz-25KHz. +/-1dB
  • Harmonic distortion : < 0,05 %
  • Signal to noise ratio : > 95dB
  • Input impedance : 100 KΩ
  • Output impedance : 220Ω
  • Crossover type : 2-way + subwoofer
  • Crossover ranges : Subwoofer/Low frequency: 50-250 Hz  Low/High: 250-6000Hz
  • Filter type : 2nd order, 12dB/Octave
  • Low-cut filter : 30Hz, 2nd order, 12dB/Octave
  • Fuse values : 95 – 120 VAC: 200mA , 210 – 240 VAC: T100mAL
  • Power supply : 115 V AC (± 5%) – 60Hz,  230 V AC (±5%) – 50Hz
  • Rack height : 1U standard 19”
  • Dimensions (WxHxD) mm : 483 x 44 x 194,5 – (19″ x 7.9″ x 1.75″)
  • Weight : 2,9 Kg – 5.5lbs

Crossover Proel ACRX2 2 Way

 

Crossover Proel ACRX2 2 Way
Crossover Proel ACRX2 2 Way

Crossover Proel ACRX2 2 Way
Crossover Proel ACRX2 2 Way

 

Crossover Proel ACRX2 2 Way